Home
About Us
Pump List
Technical Support
Customer Service
Contact Information
 


Pump List


Flo King BX650
 
BX650
 
  • Pump: All-CPVC or polypropylene construction with Teflon-covered stainless steel shaft. Pump also available in PVDF/Kynar and stainless steel.
  • Flow Rate: 650 gallons (2400 liters) per hour at 60 Hz. A flow-rate reduction of about 18% (plus or minus 3%) is typical when operating at 50 Hz.
  • Pressure: 10 feet (3 meters) of head pressure.
  • Weight: About 9 pounds (4 kg), depending on pump body length
  • Motor: Epoxy coated, rated at 1/15th hp (50 watt), single phase, 3000 RPM, TEFC, thermally protected. When ordering, specify one of the following three motors:
  • (1) 115 volt, 60 Hz, 2.6 A
  • (2) 115 volt, 50/60 Hz, 2.0 A, or
  • (3) 230 volt, 50/60 Hz, 1.3A
  • Important: To ensure priming and proper operation, solution must always be above Weep Hole on pump body. Specify length of pump body when ordering.
  •   Tank too large for the Lab Series but too small for the BX1200? The BX650 can be used in tanks as small as 5 gallons to a few hundred gallons (20 to about 1,000 L), depending on tank-turnover and agitation requirements. Pump provides 650 gallons per hour (2400 liters per hour) of flow rate using a motor rated at 1/15th hp (50-watt).

       
    Home | About Us | Pump List | Technical Support | Customer Service | Contact Information | Privacy Statement | Disclaimer
    Tri-State Pump, Inc, 5044 Industrial Road, Suite C    Farmingdale, NJ 07727
    (P) 866-921-1340, (F) 732-223-2587, E-mail: info@pumps-parts.com

    A subsidiary of Tri-State Pumps Inc.
    Copyright ©2004-2014. - Pumps-Parts.com - All Righs Reserved.